Stationary Benches
Complete, Fast, Reliable
HCS-60
This model, shown at the beginning of this section, is equipped with a 7 1/2 HP Hydraulic Power Supply that powers seven hydraulic functions that provide maximum productivity and ease of operation.
There are two hydraulic torqueing devices, one for removing threaded cylinder caps and highly torqued cap bolts (can also be used to remove piston nuts on cylinders too long to fit in Servicer), the other for removing highly torqued piston retaining nuts. A High Torque Hydraulic Nut Runner is also provided. Set up functions are hydraulically assisted. Will service all current CAT® cylinders.
The HCS-60 is available certified CE. The HCS-60 will service all current CAT® cylinders.
Specifications
HCS-60 — Specification Details
| Tuxco Model | HCS-60 |
|---|---|
| Torque Capacity lb.ft (kg-m) | 60,000 (8298) |
| Single / Double Acting Torquer | TWO DOUBLE |
| Max Capacity Cylinder Length (m) | 24 ft. (7.3) |
| Max Capacity Cylinder Diameter (mm) | 20/30 in. (508/762) |
| Max. Req. Floor Space | 32′ x 5′ with 11′ of air space on one end |
| Power Required | ALL VOLTAGE 50/60Hz 3 Ph |
| Horse Power | 7.5 HP |
| Nut Runner Torque | 5,000 lb.ft. |
| Nut Runner Speed Wrench | 8 RPM |
| Built-In Spanner | YES |
| Access Required | FRONT |
| Torquer Stroke Speed | 6/10″ STROKE 10/14 Sec./Ft. |
| Rod Extraction Installation Speed | 48″ STROKE 4.0 Sec./Ft. |
| Pendent Control | YES |
| Extraction Force (kN) | 14,700 lbs. (65.4) |
