Stationary Benches
HCS-40
This model is essentially the same as the HCS-30, has identical features, but will handle cylinders to 26 feet (7.9 m) in length, 22 inches (558.8 mm) in diameter and provide 40,000 lb-ft (5520 kg-m) of available torque.
The HCS-40 makes disassembling and reassembling hydraulic cylinders easier than ever with its massive 40,000 lb-ft (5520 kg-m) of available torque and built-in High Speed Hydraulic Nut Runner. Rod extraction is a breeze with the 7.5 tons of extraction force. Typically used on large construction equipment and mining equipment, alike, the HCS-40 is the most versatile and economical model in the current Tuxco line of equipment. Rest assured with a Tuxco HCS-40 Hydraulic Cylinder Servicer, you will be repairing hydraulic cylinder safer, faster, and more profitably then ever!
The HCS-40 is available certified CE. The HCS-40 will service all current CAT® cylinders.
Specifications
| Tuxco Model | HCS-40 |
|---|---|
| Torque Capacity lb.ft (kg-m) | 40,000 (5532) |
| Single / Double Acting Torquer | DOUBLE |
| Max Capacity Cylinder Length (m) | 26 ft. (7.9) |
| Max Capacity Cylinder Diameter (mm) | 22 in. (558.8) |
| Max. Req. Floor Space | 33′ x 3′ with 9′ of air space on one end |
| Power Required | ALL VOLTAGE 50/60Hz 3 Ph |
| Horse Power | 5 HP |
| Nut Runner Torque | 5,000 lb.ft. |
| Nut Runner Speed Wrench | 8 RPM |
| Built-In Spanner | YES |
| Access Required | FRONT |
| Torquer Stroke Speed | 10″ STROKE 13.5 Sec./Ft. |
| Rod Extraction Installation Speed | 48″ STROKE 5.2 Sec./Ft. |
| Pendent Control | YES |
| Extraction Force (kN) | 14,000 lbs. (62.3) |
