Stationary Benches
HCS-25-LS
The HCS-25-LS features an electric/hydraulic power supply which allows for faster extraction/insertion of piston rods while repairing and rebuilding hydraulic cylinders. Paired with 25,000 lb-ft (3457.5 kg-m) of available torque to service threaded glands and piston retaining nuts, this machine will repair more hydraulic cylinders, faster, resulting in higher profits on all of your hydraulic cylinder repair jobs.
The HCS-25-LS uses a 2 HP, single phase hydraulic power supply, to operate a 48 inch (1219.2 mm) double acting indexing cylinder. A hydraulic cylinder rod eight feet in length can be removed from a barrel in less than 90 seconds. The machine is designed to service hydraulic cylinders to an extended length of 19 feet (5.8 m), with up to a 16 inch (406.4 mm) diameter.An ideal, entry level hydraulic cylinder repair bench, this model is not only affordable, but offers a fast return on investment. With a HCS-25-LS, repair facilities can count on safer, faster, and more profitable repairs. Hundreds of these models are in daily use by electric utilities, municipal garages, construction companies, equipment rental facilities, and others.
The HCS-25-LS is available certified CE.
Specifications
| Tuxco Model | HCS-25-LS |
|---|---|
| Torque Capacity lb.ft (kg-m) | 25,000 (3457.5) |
| Single / Double Acting Torquer | SINGLE |
| Max Capacity Cylinder Length (m) | 19 ft. (5.8) |
| Max Capacity Cylinder Diameter (mm) | 16 in. (406.4) |
| Max. Req. Floor Space | 23′ x 3′ with 9′ of air space on one end |
| Power Required | SHOP AIR 115/230V 60Hz/1 Ph |
| Horse Power | N/A |
| Nut Runner Torque | N/A |
| Nut Runner Speed Wrench | N/A |
| Built-In Spanner | YES |
| Access Required | FRONT REAR |
| Torquer Stroke Speed | 10″ STROKE 29 Sec./Ft. |
| Rod Extraction Installation Speed | 48″ STROKE 7.6 Sec./Ft. |
| Pendent Control | NO |
| Extraction Force (kN) | 8300 lbs. (36.9) |
